A high-speed optical star network using TDMA and all-optical demultiplexing techniques

The authors demonstrate the use of time-division multiplexing (TDM) to realize a high capacity optical star network. The fundamental element of the demonstration network is a 10 ps, wavelength tunable, low jitter, pulse source. Electrical data is encoded onto three optical pulse trains, and the resultant low duty cycle optical data channels are multiplexed together using 25 ps fiber delay lines. This gives an overall network capacity of 40 Gb/s. A nonlinear optical loop mirror (NOLM) is used to carry out the demultiplexing at the station receiver. The channel to be switched out can be selected by adjusting the phase of the electrical signal used to generate the control pulses for the NOLM. By using external injection into a gain-switched distributed feedback (DFB) laser we are able to obtain very low jitter control pulses of 4-ps duration (RMS jitter <1 ps) after compression of the highly chirped gain switched pulses in a normal dispersive fiber. This enables us to achieve excellent eye openings for the three demultiplexed channels. The difficulty in obtaining complete switching of the signal pulses is presented. This is shown to be due to the deformation of the control pulse in the NOLM (caused by the soliton effect compression). The use of optical time-division multiplexing (OTDM) with all-optical switching devices is shown to be an excellent method to allow us to exploit as efficiently as possible the available fiber bandwidth, and to achieve very high bit-rate optical networks

Ultra-narrow (sub-MHz) linewidth emission from discrete mode laser diodes

A class of laser which exhibits ultra-narrow sub MHz linewidth emission necessary for numerous applications in optical communications and sensors is described. The spectral performance of commercial discrete mode (DM) and distributed feedback (DFB) lasers is compared. The devices used in this work are asymmetrically coated ridge waveguide Fabry Perot lasers which incorporated etched slot features and emitting around lambda = 1.55 mum. The active region of the devices consisted of a strained compensated InAlGaAs MQW structure

Low sensitivity to optical feedback and optical injection of discrete mode lasers

In this paper, we demonstrate the low sensitivity to both external optical feedback and external optical injection of a new type of extremely low cost single-mode lasers, called "discrete mode" (DM) lasers. The DM lasers are obtained from ridge waveguide Fabry Perot (FP) lasers, in which the effective refractive index of the lasing mode has been perturbed. These lasers exhibit a low sensitivity to external optical feedback since the coherence collapse threshold is around 5 dB higher in comparison to a commercial DFB laser

Discrete mode lasers for applications in access networks

Fast development of the modern telecommunication networks such as fiber-to-the-home or radio-over-fiber systems require an inexpensive yet reliable optical transmitter for electro-optic conversion. Such devices should be able to generate stable, single moded optical signals suitable for athermal operation. Discrete Mode Lasers (DMLs) are able to fulfill all the above-mentioned requirements with the added benefit of low sensitivity to optical feedback. DMLs are essentially Fabry-Perot lasers in which the refractive index is modified by introducing perturbations along very small sections of the laser cavity. These modifications result in a single mode laser output with a very narrow linewidth (order of 400 kHz). In this paper, we demonstrate how a DML can outperform the commonly used/commercially available DFB lasers in terms of linewidth, sensitivity to optical feedback and transmission performance in the presence of feedback

A positive interaction between inhibitors of protein synthesis and cefepime in the fight against methicillin-resistant Staphylococcus aureus

Quinupristin-dalfopristin (Q-D) synergizes with cefepime for the treatment of methicillin-resistant Staphylococcus aureus (MRSA). Here, we studied whether the synergism was restricted to MRSA and if it extended to non-beta-lactam cell wall inhibitors or to other inhibitors of protein synthesis. Three MRSA and two methicillin-susceptible S. aureus (MSSA) strains were tested, including an isogenic pair of mecA −/mecA + S. aureus Newman. The drug interactions were determined by fractional inhibitory concentration (FIC) indices and population analysis profiles. The antibacterial drugs that we used included beta-lactam (cefepime) and non-beta-lactam cell wall inhibitors (D-cycloserine, fosfomycin, vancomycin, teicoplanin), inhibitors of protein synthesis (Q-D, erythromycin, chloramphenicol, tetracycline, linezolid, fusidic acid), and polynucleotide inhibitors (cotrimoxazole, ciprofloxacin). The addition of each protein inhibitor to cefepime was synergistic (FIC ≤ 0.5) or additive (FIC > 0.5 but < 1) against MRSA, but mostly indifferent against MSSA (FIC ≥ 1 but ≤ 4). This segregation was not observed after adding cotrimoxazole or ciprofloxacin to cefepime. Population analysis profiles were performed on plates in the presence of increasing concentrations of the cell wall inhibitors plus 0.25 × minimum inhibitory concentration (MIC) of Q-D. Cefepime combined with Q-D was synergistic against MRSA, but D-cycloserine and glycopeptides were not. Thus, the synergism was specific to beta-lactam antibiotics. Moreover, the synergism was not lost against fem mutants, indicating that it acted at another level. The restriction of the beneficial effect to MRSA suggests that the functionality of penicillin-binding protein 2A (PBP2A) was affected, either directly or indirectly. Further studies are necessary in order to provide a mechanism for this positive interactio

System-performance analysis of optimized gain-switched pulse source employed in 40-and 80-Gb/s OTDM systems

The development of ultrashort optical pulse sources, exhibiting excellent temporal and spectral profiles, will play a crucial role in the performance of future optical time division multiplexed (OTDM) systems. In this paper, we demonstrate the difference in performance in 40- and 80-Gb/s OTDM systems between optical pulse sources based on a gain-switched laser whose pulses are compressed by a nonlinearly and linearly chirped fiber Bragg grating. The results achieved show that nonlinear chirp in the wings of the pulse leads to temporal pedestals formed on either side of the pulse when using the linearly chirped grating, whereas with the nonlinearly chirped grating, pedestals are essentially eliminated. In an OTDM system, these pedestals cause coherent interaction between neighboring channels, resulting in intensity fluctuations that lead to a power penalty of 1.5 dB (40 Gb/s) and 3.5 dB (80 Gb/s) in comparison to the case where the nonlinearly chirped grating is used. Simulations carried out with the aid of Virtual Photonics Inc. verify the results achieved

FROG characterisation of SOA-based wavelength conversion using XPM in conjunction with shifted filtering up to line rates of 80 GHz

The work we present here builds on recent work where we obtained 80 Gb/s error free performance using cross phase modulation (XPM) in an SOA in conjunction with a blue shifted bandpass filter. Here we present a detailed characterisation of this wavelength conversion scheme using a Frequency Resolved Optical Gating (FROG) measurement scheme for both red and blue shifted filtering. This type of characterisation has not been provided before to the best of our knowledge and is an important analysis firstly to achieve a full understanding of the gain and phase dynamics exploited by the wavelength conversion scheme presented and secondly to design a filter so that an optimum performance can be obtaine

Pulse source for 80 Gb/s systems using a gain-wwitched laser diode followed by a nonlinearly chirped grating

This work presents the generation of 3.5 ps pulses at a repetition rate of 10 GHz and the optimization of the pulse spectrum. The output pulses are near transform limited and have pulse pedestals that are virtually eliminated to 35 dB down from the peak of the pulse, thus providing a source suitable for use in 80 Gb/s OTDM systems

Optimized pulse source employing an externally injected gain-switched laser diode in conjunction with a nonlinearly chirped grating

In this paper, we demonstrate the generation of transform-limited short optical pulses, which display excellent spectral and temporal qualities by employing a novel technology, based on an externally injected gain-switched laser in conjunction with a nonlinearly chirped grating. Using this technique, 3.5-ps optical pulses exhibiting a time-bandwidth product (TBP) of 0.45 are generated, which are suitable for use in high-speed 80 Gb/s optical time-division multiplexing (OTDM) communications systems. The numerical integration of a set of rate equations using suitable parameters for the devices used in the experiments were carried out to further confirm the feasibility of the proposed method for developing an optimized pulse source for high-speed photonic systems

Scaling Laws for e+e−e^+ e^- Linear Colliders

Design studies of a future TeV e+e- Linear Collider (TLC) are presently being made by five major laboratories within the framework of a world-wide collaboration. A figure of merit is defined which enables an objective comparison of these different designs. This figure of merit is shown to depend only on a small number of parameters. General scaling laws for the main beam parameters and linac parameters are derived and prove to be very effective when used as guidelines to optimize the linear collider design. By adopting appropriate parameters for beam stability, the figure of merit becomes nearly independent of accelerating gradient and RF frequency of the accelerating structures. In spite of the strong dependence of the wake-fields with frequency, the single bunch emittance preservation during acceleration along the linac is also shown to be independent of the RF frequency when using equivalent trajectory correction schemes. In this situation, beam acceleration using high frequency structures becomes very advantageous because it enables high accelerating fields to be obtained, which reduces the overall length and consequently the total cost of the linac